Search    Advanced search
Contact Sitemap Imprint Diese Website in deutsch
  Products
   
Precipitation
Leaf Wetness
Temperature & Humidity
Wind Speed & Direction

Pyranometers

Barometric Pressure
Combi Sensor WXT520
Soil Moisture
Soil temperature
Water Level
Standard Manometers
ADCON PA1 Manometer
 

Weather sensors

Global Radiation
Meteorology, Medicine, Agriculture, the energy industry - they all depend on solar radiation - which nobody measures more accurately than Kipp & Zonen!

Download a data sheet of the

Kipp & Zonen SP Lite in pdf

format here:

Data sheet english [25KB]

Data sheet US letter [25KB]

Data sheet Australia [25KB]

Download a data sheet of the

Kipp & Zonen CMP-3 in pdf

format here:

Data sheet english [136KB]

Data sheet US letter [136KB]

Data sheet Australia [136KB]

Sensors [810KB]
Download our comprehensive sensor`s survey here.

 
 
SP-Lite

Kipp & Zonen SP-Lite
This silicium-pyranometer was especially designed for calculating evapotranspiration for precision irrigation purposes, monitor solar panels in energy production, for air pollution dispersion calculations and similar applications. SP-Lite can be used under all weather conditions. It compares favorably to ISO 9060-specified First Class Thermopile Pyranometers under clear and unobstructed natural daylight conditions.
 Technical specifications

SP-Lite uses a photo diode detector, which creates a voltage output that is proportional to the incoming radiation. This signal is converted by the integrated Adcon amplifier to a 0-2.5V signal, compatible to all Adcon RTU's.

The sensor comes complete with all mast mounting equipment, two pipe clamps, and a shielded 2m cable with a 7-pin Binder jack, compatible to all RTU's of the A723 and A733 families.

Ordering Information: 200.733.020

CMP-3

Kipp & Zonen CMP-3
CMP-3 is a pyranometer according to ISO-9060 Second Class standard. It is measuring the irradiance on a plane surface from radiant fluxes in the wavelength range from 310 to 2800nm by means of a thermopile element. This makes the CMP-3 ideal for meteorological routine measurements which require neither a First Class nor a Secondary Standard instrument.

The output signal of the thermopile sensor is converted by the integrated Adcon amplifier to a 0-2.5V signal, compatible to all Adcon RTU's.   Technical specifications

Ordering Information: 200.733.022

The sensor comes complete with all mast mounting equipment, two pipe clamps, and a shielded 2m cable with a 7-pin Binder jack, compatible to all RTU's of the A723 and A733 families.

Albedometers, Pyrgeometers, Net Radiation,
First Class Sensors, Secondary Standard
Adcon custom builds amplifiers for other products of Kipp & Zonen, such as the CMP-6, CG3 and NR1 sensors. The German Aerospace Center in Mecklenburg uses 15 Albedometers and 15 Pyrgeometers, built around an Adcon A740 addNODE weather station, for the ground truthing of satellite images. Tell your Adcon Distribution Partner about your project or contact us!

Technical Specifications CMP-3 SP-Lite
Sensitivity 5-20µV/Wm² 100 µV/Wm²
Spectral Range 310 - 2800nm 400 - 1100nm
Max. Irradiance 1400 W/m² 2000 W/m²
T.C. of Sensitivity +/-5% (-10°C - 40°C) +/- 0.15% /°C
Operating Temperature -40°C ... +80°C
-40°F ... +176°F
-30°C ... +70°C
-22°F ... +158°F
Non-stability (change/year) +/-1%
n.a.
Non-linearity
(0-1000 W/m²)
+/- 2.5% n.a.
Tilt response
(at 1000 W/m²)
+/- 3% n.a.
Print » To the top »
 
 Login for distributors
Name
Password
 

Register »
Forgot your Password? »

 
 Newsletter subscription
Email
 

Change subscription »